Flexam Master Shoe Repair Machine

Equipped with milling unit

18 mm heel cutter with guide and sole cutter on a bayonet fitting with three cutting blades. A heel sanding roller with guide can also be fitted to this bayonet.

Bayonet fitting with heel front cone.

Two long sanding belts

• Left: 40/170 mm, belt length 1650 mm
• Right: choice of 40, 75 or 100 mm width, belt length 1650 mm.

The naumkeag motor is mounted centrally.

Including a 90 mm bajo. The naumkeag motor can be pulled out and swivelled in all directions.

Triple polishing unit

On the right, a triple polishing unit with three cloth buffing wheels and three hair brushes.

Built-in dust extraction

The machine is equipped with a powerful, low-noise built-in dust extraction unit, connected to the integrated filter unit using FLEXAM antistatic filter material of the highest quality. The machine can be easily cleaned from the front.

Low-noise motor rollers

Two FLEXAM antistatic, low-noise motor rollers are fitted to the sanding motor, making the machine even quieter during operation.

Optimal dimensions

The machine has optimal dimensions, providing ample space between the two sanding belts and sufficient clearance between the right-hand sanding belt and the polishing section.

Operation and safety

Equipped with 5 easy-to-operate push-button switches with indicator lights and a central emergency stop safety switch.

Choice of working height

The machine can be set up at different shaft heights using the 10 cm high floor platform supplied with every machine. This allows each operator to adopt the most ergonomically suitable working position.

CE marking

The machine complies with the strictest European health and safety requirements in accordance with CE marking regulations.